Kadee Home

KD98 - 1 1/8" Stainless Steel Grating

Specifications

Section 12 48 16
Entrance Floor Grilles


Furnish and install KD98 Stainless Steel Grating as manufactured as manufactured by Kadee Industries, Walton Hills, Ohio 44146.
Phone: (800) 321-3827
Email: sales@kadeeindustries.com

Construction:

Tread Material manufactured from Type 304 Stainless Steel .071" x .177" surface wires spaced with a .125" slot opening and resistance welded to .070" x 1.0" Type 304 Stainless Steel support rods spaced 1" on center. Assemblies include hidden or visual lockdowns manufactured from Type 304 Stainless Steel with stainless steel machine screws.

Framing (options as listed)
Level Bed
  • 1-5/8" deep embedded frames manufactured from Extruded 6063-T6 Aluminum for permanent recessed installation, furnished with corner connectors, splice plates and anchorage devices.
  • Welded frames fabricated from
    1-1/4" x 1-1/4" x 1/8" thick Type 304 Stainless Steel angle with 1" x 1/8" intermediate members and splice plates as required, furnished with grouting strap anchors for a permanent recessed application.
  • Knock down perimeter frames fabricated from 1-1/4" x 1-1/4" x 1/8" thick Type 304 Stainless Steel angle with corner joints coped and fitted.


  • Drainage Pit Frames
  • 1-5/8" deep embedded frames manufactured from Extruded 6063-T6 Aluminum for permanent recessed installation, furnished with corner connectors, splice plates and anchorage devices and welded intermediate framing supports 1-1/2" x 1-1/2" x 3/16" aluminum angle spaced no greater than 2'0" on center.
  • Welded frames fabricated from
    1-1/4" x 1-1/4" x 1/8" thick Type 304 Stainless Steel angle with 1" x 1/8" intermediate members and splice plates as required, furnished with grouting strap anchors for a permanent recessed application and welded intermediate framing members manufactured from 1-1/2" x 1-1/2" x 2/16" Type 304 Stainless Steel angle spaced no greater than 3'0" on center for a uniform floor load of 300 lbf/sq ft. and no greater than 2'0" on center for a uniform floor load of 500 lbf/sq ft.

  • Drain Pans (options as listed)
    Manufactured from 16 gage aluminum sheet or 16 gage Type 304 Stainless Steel may be used as pit liners in Level Bed applications or Drain Pans in Drainage Pit applications.

    Finishes:
    Stainless steel grating is provided with a Polished No. 4 Finish. Stainless steel frames are provided with a stainless steel mill No. 2 Finish. Aluminum frames are provided with a standard Mill Finish or available in Clear or Bronze Class 1 Anodized Finishes.

    Information updated August 10, 2015 (install. update)

    Warranty
    5 years. For details CLICK HERE




    Kadee Industries SSS Clean Tread Model KD98 Stainless Steel Grating helps to minimize and control the entry of pollutants into buildings by capturing dirt and particulates at regularly used entrances.
    • Self cleaning design keeps dirt, water, slush and mud away from the walking surface and reduces maintenance costs.
    • Surface wires are evenly spaced to provide an ADA compliant entry system and safe support for canes, wheelchairs, crutches and other walking aids.
    • Designed with 59.9% open area for registers and water features. Custom wire spacing available as a special order item.
    • Type 304 Stainless Steel's resistance to corrosion and staining, low maintenance, and finish luster make it an ideal material for most architectural applications. Type 316 stainless steel grating is available as a special order for applications in highly corrosive environments.
    • Versatile design allows for both level bed and drainage pit applications.
    • Kadee Industries manufactures each unit to order to insure a proper fit and application for each individual project.
    • Slip Resistant with a minimum Coefficient of Friction of 0.6 in dry and wet testing.
    • Rolling Load Capacity - 1,000 lbs. per wheel.

    Applications:

    • Entrance Mats : Level Bed or Drainage Pit Applications
    • Trench Drain Grilles
    • Tree Grates
    • Swimming Pool Grates
    • Revolving Doors
    • Air Grilles

    Drawings for Download:

    *
    Additional product information and drawings are available upon request.
    *
    Carpet, Vinyl and Anodized Charts are for reference only. Colors may vary based on your monitor and/or printer. Samples are available upon request.

    KD58 - 5/8" Stainless Steel Grating

    Specifications

    Section 12 48 16
    Entrance Floor Grilles


    Furnish and install SSS Clean Tread Model KD58 Stainless Steel Grating as manufactured by Kadee Industries, Walton Hills, Ohio 44146. Phone: (800) 321-3827
    Email: sales@kadeeindustries.com

    Construction:

    Tread Material manufactured from Type 304 Stainless Steel .071" x .177" surface wires spaced with a .125" slot opening and resistance welded to a .070" x 0.5" Type 304 Stainless Steel support rods spaced 1" on center. Assemblies include hidden or visual lockdowns manufactured from Type 304 Stainless Steel with stainless steel machine screws.

    Framing (options as listed)
  • 1-1/8" deep embedded frames manufactured from Extruded 6063-T6 Aluminum for a permanent recessed installation, furnished with corner connectors, splice plates and anchorage devices.
  • Welded frames fabricated from 3/4" x 3/4" x 1/8" thick Type 304 Stainless Steel angle with 1" x 1/8" intermediate members and splice plates as required, furnished with grouting strap anchors for a permanent recessed application.
  • Knock down perimeter frames fabricated from 3/4" x 3/4" x 1/8" Type 304 Stainless Steel angle with corner joints coped and fitted.


  • Drain Pans
    (optional)
    Manufactured from 16 gage aluminum sheet or 16 gage Type 304 Stainless Steel may be used as pit liners in Level Bed applications or Drain Pans in Drainage Pit applications.

    Finishes:
    Stainless steel grating is provided with a Polished No. 4 Finish. Stainless steel frames are provided with a stainless steel Mill No. 2 Finish. Aluminum frames furnished in standard Mill Finish or available in Clear or Bronze Class 1 Anodized Finishes.

    Information updated July 24, 2015.

    Warranty
    5 years. For details CLICK HERE



    Kadee Industries' SSS Clean Tread Model KD58 Stainless Steel Grating helps to minimize and control the entry of pollutants into buildings by capturing dirt and particulates at regularly used entrances.
    • Self cleaning design keeps dirt, water, slush and mud away from walking surfaces and reduces maintenance costs.
    • Surface wires are evenly spaced to provide an ADA compliant entry system and safe support for canes, wheelchairs, crutches and other walking aids.
    • Designed with 59.9% open area for registers and water features. Custom wire spacing available as a special order item.
    • Type 304 Stainless Steel's resistance to corrosion and staining, low maintenance, and finish luster make it an ideal material for most architectural applications. Type 316 Stainless Steel grating is available as a special order for applications in highly corrosive environments.
    • Kadee Industries manufactures each unit to order to insure a proper fit and application for each individual project.
    • Slip Resistant with a minimum Coefficient of Friction of 0.6 in dry and wet testing.
    • Rolling Load Capacity - 1,000 lbs. per wheel.

    Applications:

    • Entrance Mats : Level Bed Applications
    • Air Grilles
    • Light Diffusers
    • Revolving Doors
    • Ceiling and Wall Applications

    Drawings for Download:

    *
    Additional product information and drawings are available upon request.
    *
    Carpet, Vinyl and Anodized Charts are for reference only. Colors may vary based on your monitor and/or printer. Samples are available upon request.


    KD38 - 3/8" Stainless Steel Grating

    Specifications

    Section 12 48 16
    Entrance Floor Grilles

    Furnish and install SSS Clean Tread Model KD38, Stainless Steel Floor Grating as manufactured by Kadee Industries, Walton Hills, Ohio 44146. Phone: (800) 321-3827
    Email: sales@kadeeindustries.com

    Construction:

    Tread Material manufactured from Type 304 Stainless Steel .090" x .138" surface wires spaced with a .125" slot opening and resistance welded to .281" dia. Type 304 Stainless Steel support rods spaced 2" on center. Assemblies include hidden lockdowns manufactured from Type 304 Stainless Steel with stainless steel machine screws.

    Framing (options as listed)
    Level Bed

  • 7/8" deep embedded frames manufactured from Extruded 6063-T6 Aluminum for a permanent recessed installation, furnished with corner connectors, splice plates and anchorage devices.
  • Knock down perimeter frames fabricated from 1/2" deep aluminum angle frames manufactured from Extruded 6063-T6 Aluminum Alloy.


  • Drain Pans
    (optional) manufactured from 16 gage aluminum sheet may be used as pit liners in Level Bed Applications.

    Finishes:

    Stainless steel grating is provided with a Polished No. 4 Finish. Aluminum frames furnished in standard Mill Finish or available in Clear or Bronze Class 1 Anodized Finishes.

    Information updated July 24, 2015.

    Warranty

    5 years. For details CLICK HERE





    Kadee Industries SSS Clean Tread Model KD38 Stainless Steel Grating helps to minimize and control the entry of pollutants into buildings by capturing dirt and particulates at regularly used entrances.
    • This product is recommended for the replacement and upgrade of existing 3/8" entrance flooring for renovation projects, as well as surface mounted and shallow recess applications.
    • Self cleaning design keeps dirt, water, slush and mud away from the walking surface and reduces maintenance costs, making regular maintenance effortless.
    • Surface wires and evenly spaced to provide an ADA compliant entry system and safe support for canes, wheelchairs, crutches and other walking aids.
    • Type 304 Stainless Steel's resistance to corrosion and staining, low maintenance, and finish luster make it an ideal material for most architectural applications.
    • Kadee Industries manufactures each unit to order to insure a proper fit and application for each individual project.
    • Rolling Load Capacity - 500 lbs. per wheel.

    Applications

    • Entrance Mats : Level Bed Applications
    • Air Grilles
    • Light Diffusers
    • Revolving Doors
    • Ceiling and Wall Applications

    Drawings for Download:

    *
    Additional product information and drawings are available upon request.
    *
    Carpet, Vinyl and Anodized Charts are for reference only. Colors may vary based on your monitor and/or printer. Samples are available upon request.


    ENTEC 58 - 5/8" Stainless Steel Grating

    Specifications

    Section 12 48 16
    Entrance Floor Grilles


    Furnish and install SSS Clean Tread Model ENTEC™-58, Stainless Steel Grating as manufactured as manufactured by Kadee Industries, Walton Hills, Ohio 44146.
    Phone: (800) 321-3827
    Email: sales@kadeeindustries.com

    Construction:

    Tread Material manufactured from Type 304 Stainless Steel .090" x .172" surface wires spaced with a .145" slot opening and resistance welded to .125" x .500" Type 304 Stainless Steel support rods spaced 2" on center and 1-3/8" wide x .036" formed Type 304 Stainless Steel tread insert channels spaced 4" on center.

    Assemblies include hidden lockdowns manufactured from Type 304 Stainless Steel with stainless steel machine screws.

    Tread Inserts (options as listed)
    -Nylon Carpet Inserts: 100% Nylon 6 carpet fibers fusion bonded to a polypropylene backing.
    -Heavy Duty Carpet Inserts: Polypropylene fibers fusion bonded to a polypropylene backing.

    Framing (options as listed)
    Level Bed
  • 1-1/8" deep embedded frames manufactured from Extruded 6063-T6 Aluminum for permanent recessed installation, furnished with corner connectors, splice plates and anchorage devices.
  • Welded frames fabricated from 3/4" x 3/4" x 1/8" thick Type 304 Stainless Steel angle with 1" x 1/8" intermediate members and splice plates as required, furnished with grouting strap anchors for a permanent recessed application.
  • Knock down perimeter frames fabricated from 3/4" x 3/4" x 1/8" thick Type 304 Stainless Steel angle with corner joints coped and fitted.


  • Drain Pans (optional) manufactured from 16 gage aluminum steel or 16 gage Type 304 Stainless Steel may be used as pit liners in Level Bed applications.

    Finishes:
    Stainless steel grating is provided with a Polished No. 4 Finish. Stainless steel frames are provided with a stainless steel Mill No. 2 Finish. Aluminum frames furnished in standard Mill Finish or available in Clear or Bronze Class 1 Anodized Finishes.

    Information updated July 24, 2015.

    Warranty
    5 years. For details CLICK HERE





    Kadee Industries SSS Clean Tread Model ENTEC™-58 Stainless Steel Grating helps to minimize and control the entry of pollutants into buildings by capturing dirt and particulates at regularly used entrances.
    • The grating is a combination of stainless steel surface wires, which create a cleaning and scraping process, along with carpet inserts spaced every 4" on center, to clean and dry shoe traffic.
    • Self cleaning design keeps dirt, water, slush and mud away from the walking surface and reduces maintenance costs.
    • Surface wires are evenly spaced to provide an ADA compliant entry system and safe support for canes, wheelchairs, crutches and other walking aids.
    • Type 304 Stainless Steel's resistance to corrosion and staining, low maintenance and finish luster make it an ideal material for most architectural applications.
    • Kadee Industries manufactures each unit to order to insure a proper fit and application for each individual project.

    Applications

    • Entrance Mats: Level Bed Applications.
    • Revolving Doors

    Drawings for Download:


    *
    Additional product information and drawings are available upon request.
    *
    Carpet, Vinyl and Anodized Charts are for reference only. Colors may vary based on your monitor and/or printer. Samples are available upon request.


    ENTEC 38 - 3/8" Stainless Steel Grating

    Specifications

    Section 12 48 16
    Entrance Floor Grilles


    Furnish and install SSS Clean Tread Model ENTEC™-38 Stainless Steel Grating as manufactured by Kadee Industries, Walton Hills, Ohio 44146. Phone: (800) 321-3827
    Email: sales@kadeeindustries.com

    Construction:

    Tread Material shall be manufactured from Type 304 Stainless Steel .090" x .138" surface wires spaced with a .130" slot opening and resistance welded to .281" dia. Type 304 Stainless Steel support rods spaced 2" on center and 1-3/8" wide x .036" formed Type 304 Stainless Steel tread insert channels spaced 4" on center.

    Assemblies include hidden lockdowns manufactured from Type 304 Stainless Steel with stainless steel machine screws.

    Tread Inserts (options as listed)
    -Nylon Carpet Inserts: 100% Nylon 6 carpet fibers fusion bonded to a polypropylene backing.
    -Heavy Duty Carpet Inserts: Polypropylene fibers fusion bonded to a polypropylene backing.

    Framing (options as listed)
    Level Bed
  • Provide 7/8" deep embedded frames for permanent recessed installation manufactured from Extruded Aluminum Alloy 6063-T6, complete with corner connectors, splice plates and anchorage devices.
  • Provide 1/2" deep aluminum angle frames manufactured from Extruded Aluminum Alloy 6063-T6. Anchors provided by the installer.


  • Drain Pans
    (optional) manufactured from 16 gage aluminum sheet may be used as pit liners in Level Bed applications.

    Finishes:

    Stainless steel grating is provided with a Polished No. 4 Finish. Stainless steel frames are provided with a stainless steel Mill No. 2 Finish. Aluminum frames furnished in standard Mill Finish or available in Clear or Bronze Class 1 Anodized Finishes.

    Information updated July 24, 2015.

    Warranty
    5 years. For details CLICK HERE




    Kadee Industries SSS Clean Tread Model ENTEC™- 38 Stainless Steel Grating helps to minimize and control the entry of pollutants into buildings by capturing dirt and particulates at regularly used entrances.

    • The grating is a combination of stainless steel surface wires, which create a cleaning and scraping process, along with carpet inserts spaced every 4" on center, to clean and dry shoe traffic.
    • Self cleaning design keeps dirt, water, slush and mud away from the walking surface and reduces maintenance costs.
    • Surface wires are evenly spaced to provide an ADA compliant entry system and safe support for canes, wheelchairs, crutches and other walking aids.
    • Type 304 Stainless Steel's resistance to corrosion and staining, low maintenance, and finish luster make it an ideal material for most architectural applications.
    • Kadee Industries manufactures each unit to order to insure a proper fit and application for each individual project.


    Applications

    • Entrance Mats: Level Bed Applications
    • Revolving Doors

    Drawings for Download:


    *
    Additional product information and drawings are available upon request.
    *
    Carpet, Vinyl and Anodized Charts are for reference only. Colors may vary based on your monitor and/or printer. Samples are available upon request.



    © 2013 Kadee Industries
    For website concerns - email: mbehra@kadeeindustries.com